The IMPULSE®•P3 Series 2 compact, cost-effective crane control offers you the best of both worlds!
- It can be programmed identically to our original IMPULSE•P3, so there's no operator learning curve.
- Dual programming offers you the choice to use many of the advanced control features found on our IMPULSE•G+ Series 2 drives!
Software Identical to the Original IMPULSE•P3
Magnetek knows you want to be up and running with your IMPULSE•P3 Series 2, without operators having to relearn
how to use it. That's why in the standard, factory default setting, programming and operation of the IMPULSE•P3 Series 2 are identical to the original IMPULSE•P3. Of course, we designed the IMPULSE•P3 Series 2 with the same superior reliability as the original!
Dual Programming Offers Additional
Control FeaturesWith the adjustment of a single parameter, the IMPULSE•P3 Series 2 now offers you the versatility of many additional advanced control and safety features. Our dual software comes standard with the IMPULSE•P3 Series 2.
Now More CompactThe IMPULSE•P3 Series 2 is now more compact (up to 50% smaller) than its predecessor, allowing for more compact enclosures–a great benefit given crane and hoist space limitations. The IMPULSE•P3 Series 2 is also available with an optional flat heat sink design* that can reduce mounting depth by up to 45%.
Expanded Horsepower Range
Plus, Magnetek's IMPULSE•P3 Series 2 has an expanded horsepower range to meet a variety of application needs.
Unsurpassed Product SupportAs always, you can count on Magnetek and IMPULSE® drives to help you achieve the maximum performance and reliability of your overhead material handling system:
- Two-year warranty
- Electromotive Service Technicians on call 24/7
- On-site and in-house product training programs
- Fully tested prior to shipment
- UL and cUL Listed; CE Approved
- UL recognized Electronic Thermal Overload
* Consult factory on suitability of the flat heat sink design for your specific application.
IMPULSE®•P3 Series 2 can also be purchased as part of a complete,
pre-engineered TCONTROLS motor control system.
|
Standard Features Include:
- 120 Volt control voltage interface card
- Brake contactor
- Branch fusing
- Built-in electronic motor thermal overload protection
- Dynamic braking resistor(s)
- All wiring to a single terminal strip
- Clearly marked wires (at both ends)
- Basic wiring diagram
- NEMA 12 enclosure
Technical Data
|
